November 25, 2016
Orange Pi PC - first boot with Fedora
Here it is. I put the Fedora 22 "minimal system" image on an SD card,
plugged it in, and connected power.
Once it boots, I login as root with password "orangepi".
HELLO! BOOT0 is starting!
boot0 version : 4.0.0
fel_flag = 0x00000000
rtc[0] value = 0x00000000
rtc[1] value = 0x00000000
rtc[2] value = 0x00000000
rtc[3] value = 0x00000000
rtc[4] value = 0x00000000
rtc[5] value = 0x00000000
rtc[6] value = 0x00000000
rtc[7] value = 0x00000000
DRAM DRIVE INFO: V0.8
DRAM Type = 3 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
DRAM CLK = 672 MHz
DRAM zq value: 003b3bfb
READ DQS LCDL = 001d1e1e
DRAM SIZE =1024 M
odt delay
dram size =1024
card boot number = 0
card no is 0
sdcard 0 line count 4
[mmc]: mmc driver ver 2014-12-10 21:20:39
[mmc]: ***Try SD card 0***
[mmc]: SD/MMC Card: 4bit, capacity: 7580MB
[mmc]: vendor: Man 00035344 Snr 8cdf0de0
[mmc]: product: SL08G
[mmc]: revision: 8.0
[mmc]: ***SD/MMC 0 init OK!!!***
sdcard 0 init ok
The size of uboot is 000dc000.
sum=ede66ee7
src_sum=ede66ee7
Succeed in loading uboot from sdmmc flash.
Ready to disable icache.
Jump to secend Boot.
SUNXI_NORMAL_MODE
[ 0.372]e mode
U-Boot 2011.09-rc1 (Jun 21 2015 - 19:33:17) Allwinner Technology
[ 0.380]version: 1.1.0
normal mode
[ 0.387]pmbus: ready
not set main pmu id
axp_probe error
[ 0.402]PMU: pll1 1200 Mhz,PLL6=600 Mhz
AXI=400 Mhz,AHB=200 Mhz, APB1=100 Mhz
sid read already
fel key new mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
normal mode
[ 0.432]DRAM: 1 GiB
relocation Offset is: 35af9000
[box standby] read rtc = 0x0
[box_start_os] mag be start_type no use
user_gpio config
user_gpio ok
gic: normal or no secure os mode
workmode = 0
MMC: 0
[ 0.507][mmc]: mmc driver ver 2014-12-10 9:23:00
[ 0.512][mmc]: get sdc_phy_wipe fail.
[ 0.516][mmc]: get sdc0 sdc_erase fail.
[ 0.520][mmc]: get sdc_f_max fail,use default 50000000Hz
[ 0.525][mmc]: get sdc_ex_dly_used fail,use default dly
[ 0.531][mmc]: SUNXI SD/MMC: 0
[ 0.544][mmc]: *Try SD card 0*
[ 0.593][mmc]: CID 0x3534453 0x4c303847 0x808cdf0d 0xe0010825
[ 0.598][mmc]: mmc clk 50000000
[ 0.602][mmc]: SD/MMC Card: 4bit, capacity: 7580MB
[ 0.606][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
[ 0.612][mmc]: ***SD/MMC 0 init OK!!!***
[ 0.616][mmc]: erase_grp_size:0x1WrBlk * 0x200 = 0x200 Byte
[ 0.622][mmc]: secure_feature 0x0
[ 0.625][mmc]: secure_removal_type 0x0
[ 0.629]sunxi flash init ok
script config pll_de to 864 Mhz
Not Found clk pll_video1 in script
script config pll_video to 297 Mhz
[boot]disp_init_tv
[DISP_TV] disp_init_tv enter g_tv_used
screen 0 do not support TV TYPE!
[BOOOT_DISP_TV] disp tv device_registered
unable to find regulator vcc-hdmi-18 from [pmu1_regu] or [pmu2_regu]
enable power vcc-hdmi-18, ret=-1
DRV_DISP_Init end
boot_disp.auto_hpd=1
auto hpd check has 50 times!
[disk_read_fs] no the partition
error: open disp_rsl.fex, maybe it is not exist
attched ok, mgr1<-->device1, type=2, mode=11----
ready to set mode
disp_tv_enable
[ 1.470]finally, output_type=0x2, output_mode=0xb, screen_id=0x1, disp_para=0x20b0000
fail to find part named env
Using default environment
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
mbr not exist
base bootcmd=run setargs_mmc boot_normal
bootcmd set setargs_mmc
key 0
cant find rcvy value
cant find fstbt value
no misc partition is found
to be run cmd=run setargs_mmc boot_normal
[ 1.507][mmc]: MMC Device 2 not found
[ 1.511][mmc]: Can not find mmc dev
[ 1.515][mmc]: read first backup failed in fun sdmmc_secure_storage_read line 1849
sunxi_secstorage_read fail
get secure storage map err
the private part isn't exist
WORK_MODE_BOOT
adver not need show
sunxi_bmp_logo_display
[disk_read_fs] no the partition
error: open bootlogo.bmp, maybe it is not exist
sunxi bmp info error : unable to open logo file bootlogo.bmp
[ 1.548]Hit any key to stop autoboot: 0
** Unable to read "script.bin" from mmc 0:1 **
[ 5.279][mmc]: blkcnt should not be 0
## Booting kernel from Legacy Image at 40007800 ...
Image Name: Linux-3.4.39
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 10915552 Bytes = 10.4 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
[ 5.471][mmc]: MMC Device 2 not found
[ 5.474][mmc]: mmc not find,so not exit
[ 5.479]
Starting kernel ...
[sun8i_fixup]: From boot, get meminfo:
Start: 0x40000000
Size: 1024MB
ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1
ion_reserve_common: ion reserve: [0x70000000, 0x80000000]!
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39 (boris@UbuntuMate) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Mon Oct 12 12:02:29 CEST 2015
[ 0.000000] Ignoring tag cmdline (using the default kernel command line)
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: CMA: reserved 256 MiB at 70000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c1000cc0, node_mem_map c10dd000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192850 pages, LIFO batch:31
[ 0.000000] HighMem zone: 594 pages used for memmap
[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c19f4000 s11840 r8192 d12736 u32768
[ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 initcall_debug=0 console=ttyS0,115200 console=tty0 init=/init
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 758676k/758676k available, 289900k reserved, 8192K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0986378 (9721 kB)
[ 0.000000] .init : 0xc0987000 - 0xc0f86e40 (6144 kB)
[ 0.000000] .data : 0xc0f88000 - 0xc1003738 ( 494 kB)
[ 0.000000] .bss : 0xc1003eec - 0xc10dc400 ( 866 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.39 (boris@UbuntuMate) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro GCC 2012.02) ) #1 SMP PREEMPT Mon Oct 12 12:02:29 CEST 2015
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: sun8i
[ 0.000000] Ignoring tag cmdline (using the default kernel command line)
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] cma: CMA: reserved 256 MiB at 70000000
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] On node 0 totalpages: 262144
[ 0.000000] free_area_init_node: node 0, pgdat c1000cc0, node_mem_map c10dd000
[ 0.000000] Normal zone: 1710 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 192850 pages, LIFO batch:31
[ 0.000000] HighMem zone: 594 pages used for memmap
[ 0.000000] HighMem zone: 66990 pages, LIFO batch:15
[ 0.000000] script_init enter!
[ 0.000000] script_init exit!
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c19f4000 s11840 r8192 d12736 u32768
[ 0.000000] pcpu-alloc: s11840 r8192 d12736 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259840
[ 0.000000] Kernel command line: earlyprintk=ttyS0,115200 loglevel=8 initcall_debug=0 console=ttyS0,115200 console=tty0 init=/init
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 1024MB = 1024MB total
[ 0.000000] Memory: 758676k/758676k available, 289900k reserved, 8192K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0986378 (9721 kB)
[ 0.000000] .init : 0xc0987000 - 0xc0f86e40 (6144 kB)
[ 0.000000] .data : 0xc0f88000 - 0xc1003738 ( 494 kB)
[ 0.000000] .bss : 0xc1003eec - 0xc10dc400 ( 866 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Additional per-CPU info printed with stalls.
[ 0.000000] NR_IRQS:544
[ 0.000000] Architected local timer running at 24.00MHz.
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled, bootconsole disabled
[ 0.019916] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
[ 0.019971] pid_max: default: 32768 minimum: 301
[ 0.020244] Mount-cache hash table entries: 512
[ 0.021127] Initializing cgroup subsys cpuacct
[ 0.021157] Initializing cgroup subsys freezer
[ 0.021203] CPU: Testing write buffer coherency: ok
[ 0.021257] ftrace: allocating 26203 entries in 77 pages
[ 0.050268] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.050301] [sunxi_smp_prepare_cpus] enter
[ 0.050341] Setting up static identity map for 0x406d2af0 - 0x406d2b48
[ 0.051182] CPU1: Booted secondary processor
[ 0.051182] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.051315] CPU2: Booted secondary processor
[ 0.051315] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.051315] CPU3: Booted secondary processor
[ 0.051315] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.060174] Brought up 4 CPUs
[ 0.060256] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
[ 0.060841] devtmpfs: initialized
[ 0.063131] wakeup src cnt is : 1.
[ 0.063150] [exstandby]leave extended_standby_enable_wakeup_src : event 0x800000
[ 0.063173] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_map 0x0
[ 0.063197] [exstandby]leave extended_standby_enable_wakeup_src : wakeup_gpio_group 0x40
[ 0.063222] sunxi pm init
[ 0.063352] pinctrl core: initialized pinctrl subsystem
[ 0.073899] NET: Registered protocol family 16
[ 0.074554] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[ 0.074554] script_sysfs_init success
[ 0.074554] sunxi_dump_init success
[ 0.074554] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
[ 0.074554] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
[ 0.074587] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.074620] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.074792] script config pll_video to 297 Mhz
[ 0.074817] script config pll_de to 864 Mhz
[ 0.074839] script config pll_ve to 402 Mhz
[ 0.074872] sunxi_default_clk_init
[ 0.074888] try to set pll6ahb1 to 200000000
[ 0.074914] try to set ahb clk source to pll6ahb1
[ 0.074932] set ahb clk source to pll6ahb1
[ 0.074950] try to set ahb1 to 200000000
[ 0.074968] try to set apb1 to 100000000
[ 0.075299] ===fe3o4==== sunxi_root_procfs_attach ret:0
[ 0.080767] bio: create slab at 0
[ 0.080767] [ARISC] :sunxi-arisc driver v1.04
[ 0.095576] [ARISC] :arisc version: [v0.1.34]
[ 0.174155] [ARISC] :sunxi-arisc driver v1.04 startup succeeded
[ 0.180383] SCSI subsystem initialized
[ 0.180565] usbcore: registered new interface driver usbfs
[ 0.180645] usbcore: registered new interface driver hub
[ 0.180689] usbcore: registered new device driver usb
[ 0.180689] twi_chan_cfg()335 - [twi0] has no twi_regulator.
[ 0.180689] twi_chan_cfg()335 - [twi1] has no twi_regulator.
[ 0.180689] twi_chan_cfg()335 - [twi2] has no twi_regulator.
[ 0.180689] Linux video capture interface: v2.00
[ 0.180713] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 0.181186] Bluetooth: Core ver 2.16
[ 0.181232] NET: Registered protocol family 31
[ 0.181254] Bluetooth: HCI device and connection manager initialized
[ 0.181282] Bluetooth: HCI socket layer initialized
[ 0.181304] Bluetooth: L2CAP socket layer initialized
[ 0.181345] Bluetooth: SCO socket layer initialized
[ 0.181553] cfg80211: Calling CRDA to update world regulatory domain
[ 0.181629] Switching to clocksource arch_sys_counter
[ 0.192031] FS-Cache: Loaded
[ 0.192305] CacheFiles: Loaded
[ 0.202056] NET: Registered protocol family 2
[ 0.202323] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.202849] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.204462] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.205254] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.205278] TCP: reno registered
[ 0.205297] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205341] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.205618] NET: Registered protocol family 1
[ 0.205955] RPC: Registered named UNIX socket transport module.
[ 0.205981] RPC: Registered udp transport module.
[ 0.205999] RPC: Registered tcp transport module.
[ 0.206017] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.545077] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
[ 0.545223] sunxi_reg_init enter
[ 0.545955] audit: initializing netlink socket (disabled)
[ 0.546012] type=2000 audit(0.540:1): initialized
[ 0.549098] highmem bounce pool size: 64 pages
[ 0.550082] NFS: Registering the id_resolver key type
[ 0.550436] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 0.551107] NTFS driver 2.1.30 [Flags: R/W].
[ 0.551230] fuse init (API version 7.18)
[ 0.551982] Btrfs loaded
[ 0.552015] msgmni has been set to 1465
[ 0.553043] io scheduler noop registered
[ 0.553067] io scheduler deadline registered
[ 0.553149] io scheduler cfq registered (default)
[ 0.553576] [DISP]disp_module_init
[ 0.553860] cmdline,disp=
[ 0.561745] [DISP] Fb_map_kernel_logo,line:925:Fb_map_kernel_logo failed!
[ 0.574479] Console: switching to colour frame buffer device 160x45
[ 0.588116] [DISP]disp_module_init finish
[ 0.588395] sw_uart_get_devinfo()1503 - uart0 has no uart_regulator.
[ 0.588812] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
[ 0.588956] sw_uart_pm()890 - uart0 clk is already enable
[ 0.589086] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
[ 0.685050] console [ttyS0] enabled
[ 1.282411] sunxi_cmatest_init enter
[ 1.446056] sunxi_cmatest_init success
[ 1.599962] loop: module loaded
[ 1.749898] sunxi_spi_chan_cfg()1355 - [spi-0] has no spi_regulator.
[ 1.913160] sunxi_spi_chan_cfg()1355 - [spi-1] has no spi_regulator.
[ 2.004767] tun: Universal TUN/TAP device driver, 1.6
[ 2.014196] tun: (C) 1999-2004 Max Krasnyansky
[ 2.026076] PPP generic driver version 2.4.2
[ 2.034901] PPP BSD Compression module registered
[ 2.044082] PPP Deflate Compression module registered
[ 2.055597] PPP MPPE Compression module registered
[ 2.064744] NET: Registered protocol family 24
[ 2.073453] PPTP driver version 0.8.5
[ 2.081420] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.112538] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.125302] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
[ 2.138052] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
[ 2.160031] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
[ 2.170986] hub 1-0:1.0: USB hub found
[ 2.178992] hub 1-0:1.0: 1 port detected
[ 2.207493] sunxi-ehci sunxi-ehci.2: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.220287] sunxi-ehci sunxi-ehci.2: new USB bus registered, assigned bus number 2
[ 2.232998] sunxi-ehci sunxi-ehci.2: irq 106, io mem 0xf1c1b000
[ 2.260046] sunxi-ehci sunxi-ehci.2: USB 0.0 started, EHCI 1.00
[ 2.270866] hub 2-0:1.0: USB hub found
[ 2.278781] hub 2-0:1.0: 1 port detected
[ 2.307209] sunxi-ehci sunxi-ehci.4: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.319941] sunxi-ehci sunxi-ehci.4: new USB bus registered, assigned bus number 3
[ 2.332595] sunxi-ehci sunxi-ehci.4: irq 110, io mem 0xf1c1d000
[ 2.360045] sunxi-ehci sunxi-ehci.4: USB 0.0 started, EHCI 1.00
[ 2.370856] hub 3-0:1.0: USB hub found
[ 2.378808] hub 3-0:1.0: 1 port detected
[ 2.387297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.418081] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.430590] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 4
[ 2.443017] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
[ 2.514512] hub 4-0:1.0: USB hub found
[ 2.522639] hub 4-0:1.0: 1 port detected
[ 2.551196] sunxi-ohci sunxi-ohci.2: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.563688] sunxi-ohci sunxi-ohci.2: new USB bus registered, assigned bus number 5
[ 2.576070] sunxi-ohci sunxi-ohci.2: irq 107, io mem 0xf1c1b400
[ 2.644484] hub 5-0:1.0: USB hub found
[ 2.652530] hub 5-0:1.0: 1 port detected
[ 2.680988] sunxi-ohci sunxi-ohci.4: SW USB2.0 'Open' Host Controller (OHCI) Driver
[ 2.693362] sunxi-ohci sunxi-ohci.4: new USB bus registered, assigned bus number 6
[ 2.705674] sunxi-ohci sunxi-ohci.4: irq 111, io mem 0xf1c1d400
[ 2.774500] hub 6-0:1.0: USB hub found
[ 2.782587] hub 6-0:1.0: 1 port detected
[ 2.791070] Initializing USB Mass Storage driver...
[ 2.800570] usbcore: registered new interface driver usb-storage
[ 2.811174] USB Mass Storage support registered.
[ 2.820252] usbcore: registered new interface driver ums-alauda
[ 2.830788] usbcore: registered new interface driver ums-cypress
[ 2.841378] usbcore: registered new interface driver ums-datafab
[ 2.851914] usbcore: registered new interface driver ums_eneub6250
[ 2.862602] usbcore: registered new interface driver ums-freecom
[ 2.873052] usbcore: registered new interface driver ums-isd200
[ 2.883357] usbcore: registered new interface driver ums-jumpshot
[ 2.893825] usbcore: registered new interface driver ums-karma
[ 2.903850] usbcore: registered new interface driver ums-onetouch
[ 2.914109] usbcore: registered new interface driver ums-realtek
[ 2.924202] usbcore: registered new interface driver ums-sddr09
[ 2.934168] usbcore: registered new interface driver ums-sddr55
[ 2.944054] usbcore: registered new interface driver ums-usbat
[ 2.953891] usbcore: registered new interface driver usbserial
[ 2.963522] usbserial: USB Serial Driver core
[ 2.971513] usbcore: registered new interface driver option
[ 2.980864] USB Serial support registered for GSM modem (1-port)
[ 2.991203] file system registered
[ 2.999535] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 3.010483] android_usb gadget: Number of LUNs=3
[ 3.018793] lun0: LUN: removable file: (no medium)
[ 3.027382] lun1: LUN: removable file: (no medium)
[ 3.035911] lun2: LUN: removable file: (no medium)
[ 3.044724] android_usb gadget: android_usb ready
[ 3.053194] uinput result 0 , vmouse_init
[ 3.061456] mousedev: PS/2 mouse device common for all mice
[ 3.070965] sunxikbd_init failed.
[ 3.077748] ls_fetch_sysconfig_para: type err device_used = 0.
[ 3.087479] =========script_get_err============
[ 3.095550] ltr_init: ls_fetch_sysconfig_para err.
[ 3.104383] sunxi-rtc sunxi-rtc: rtc core: registered sunxi-rtc as rtc0
[ 3.114916] i2c /dev entries driver
[ 3.122076] IR RC5(x) protocol handler initialized
[ 3.130558] sunxi tsc version 0.1
[ 3.137387] tscdev_init: tsc driver is disabled
[ 3.145540] sunxi cedar version 0.1
[ 3.152576] [cedar]: install start!!!
[ 3.159776] [cedar]: install end!!!
[ 3.166579] sunxi_wdt_init_module: sunxi WatchDog Timer Driver v1.0
[ 3.176639] sunxi_wdt_probe: devm_ioremap return wdt_reg 0xf1c20ca0, res->start 0x01c20ca0, res->end 0x01c20cbf
[ 3.188004] sunxi_wdt_probe: initialized (g_timeout=16s, g_nowayout=0)
[ 3.201496] wdt_enable, write reg 0xf1c20cb8 val 0x00000000
[ 3.210844] timeout_to_interv, line 167
[ 3.218208] interv_to_timeout, line 189
[ 3.225537] wdt_set_tmout, write 0x000000b0 to mode reg 0xf1c20cb8, actual timeout 16 sec
[ 3.238139] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.250872] Bluetooth: HCI UART driver ver 2.2
[ 3.259195] [cpu_freq] ERR:get cpu extremity frequency from sysconfig failed, use max_freq
[ 3.272191] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.109 2014-12-4 20:51) Compiled in Oct 12 2015 at 12:00:18
[ 3.287330] [mmc]: get mmc0's sdc_power is null!
[ 3.296230] [mmc]: get mmc1's sdc_power is null!
[ 3.305091] [mmc]: get mmc1's 2xmode ok, val = 1
[ 3.313970] [mmc]: get mmc1's ddrmode ok, val = 1
[ 3.323007] [mmc]: get mmc2's sdc_power is null!
[ 3.331929] [mmc]: get mmc2's 2xmode ok, val = 1
[ 3.340520] [mmc]: get mmc2's ddrmode ok, val = 1
[ 3.349167] [mmc]: MMC host used card: 0x7, boot card: 0x5, io_card 2
[ 3.360708] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.375256] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.388352] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.389660] [mmc]: sdc0 power_supply is null
[ 3.410028] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.423761] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.439526] sunxi_leds_fetch_sysconfig_para script_parser_fetch "leds_para" leds_used = -1063626804
[ 3.452912] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
[ 3.464407] =========script_get_err============
[ 3.472845] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 52, RTO !!
[ 3.484517] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.485575] usbcore: registered new interface driver usbhid
[ 3.485581] usbhid: USB HID core driver
[ 3.517606] asoc: sndcodec <-> sunxi-codec mapping ok
[ 3.518413] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.540680] *******************Try sdio*******************
[ 3.551324] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.563463] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
[ 3.573295] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.585744] oprofile: using arm/armv7-ca7
[ 3.593967] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.605972] u32 classifier
[ 3.612788] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 0 err, cmd 5, RTO !!
[ 3.624720] Actions configured
[ 3.624736] *******************Try sd *******************
[ 3.642338] Netfilter messages via NETLINK v0.30.
[ 3.651522] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.651574] nf_conntrack version 0.5.0 (15950 buckets, 63800 max)
[ 3.676537] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.676631] ctnetlink v0.93: registering with nfnetlink.
[ 3.676676] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 3.676682] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 3.723139] xt_time: kernel timezone is -0000
[ 3.732124] IPv4 over IPv4 tunneling driver
[ 3.733006] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.755216] gre: GRE over IPv4 demultiplexor driver
[ 3.764586] ip_gre: GRE over IPv4 tunneling driver
[ 3.774282] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.784290] arp_tables: (C) 2002 David S. Miller
[ 3.793425] TCP: cubic registered
[ 3.801047] Initializing XFRM netlink socket
[ 3.809913] NET: Registered protocol family 10
[ 3.819779] Mobile IPv6
[ 3.826528] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 3.826538] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 3.826686] IPv6 over IPv4 tunneling driver
[ 3.827570] NET: Registered protocol family 17
[ 3.827596] NET: Registered protocol family 15
[ 3.877647] Bluetooth: RFCOMM TTY layer initialized
[ 3.887042] Bluetooth: RFCOMM socket layer initialized
[ 3.896626] Bluetooth: RFCOMM ver 1.11
[ 3.904564] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 3.914194] Bluetooth: BNEP filters: protocol multicast
[ 3.923684] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 3.934021] L2TP core driver, V2.0
[ 3.941397] PPPoL2TP kernel driver, V2.0
[ 3.949255] L2TP IP encapsulation support (L2TPv3)
[ 3.958102] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.971971] L2TP netlink interface
[ 3.972047] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
[ 3.993189] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
[ 3.993196] L2TP ethernet pseudowire support (L2TPv3)
[ 3.993203] Registering the dns_resolver key type
[ 4.024769] VFP support v0.3:
[ 4.024903] mmc0: new high speed SDHC card at address aaaa
[ 4.041151] implementor 41 architecture 2 part 30 variant 7 rev 5
[ 4.041227] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[ 4.042518] mmcblk0: p1 p2
[ 4.043016] *******************sd init ok*******************
[ 4.043034] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.044565] [mmc]: sdc2 power_supply is null
[ 4.060033] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.080841] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.081672] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.081693] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.084161] [mmc]: sdc2 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.086058] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.086075] *******************Try sdio*******************
[ 4.086890] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.087715] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.088540] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.089363] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.089380] *******************Try sd *******************
[ 4.090195] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.091023] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.091848] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.092673] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.092689] *******************Try mmc*******************
[ 4.092697] [mmc]: sdc2 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.093596] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.093616] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.093711] [mmc]: sdc2 power_supply is null
[ 4.096272] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.097791] [mmc]: sdc2 power_supply is null
[ 4.110024] [mmc]: sdc2 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.131100] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.132192] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.132212] [mmc]: sdc2 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.134810] [mmc]: sdc2 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.136989] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.137006] *******************Try sdio*******************
[ 4.138090] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.139183] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.140276] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.141369] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.141386] *******************Try sd *******************
[ 4.142469] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.143563] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.144656] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.145749] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.145766] *******************Try mmc*******************
[ 4.145774] [mmc]: sdc2 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.146953] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.146973] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.147062] [mmc]: sdc2 power_supply is null
[ 4.149621] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.151140] [mmc]: sdc2 power_supply is null
[ 4.170024] [mmc]: sdc2 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.191641] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.193270] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.193290] [mmc]: sdc2 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.196150] [mmc]: sdc2 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.198891] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.198908] *******************Try sdio*******************
[ 4.200526] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.202156] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.203786] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.205416] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.205433] *******************Try sd *******************
[ 4.207051] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.208681] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.210311] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.211941] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.211958] *******************Try mmc*******************
[ 4.211965] [mmc]: sdc2 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.213706] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.213726] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.213815] [mmc]: sdc2 power_supply is null
[ 4.216374] [mmc]: sdc2 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.217892] [mmc]: sdc2 power_supply is null
[ 4.229232] ThumbEE CPU extension supported.
[ 4.230028] [mmc]: sdc2 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.252175] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.254347] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 52, RTO !!
[ 4.254367] [mmc]: sdc2 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.257496] [mmc]: sdc2 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.260801] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 8, RTO !!
[ 4.260819] *******************Try sdio*******************
[ 4.262974] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.265134] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.267294] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.269454] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 5, RTO !!
[ 4.269471] *******************Try sd *******************
[ 4.271628] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.273788] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.275948] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.278108] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 55, RTO !!
[ 4.278124] *******************Try mmc*******************
[ 4.278132] [mmc]: sdc2 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.280435] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 2 err, cmd 1, RTO !!
[ 4.280456] [mmc]: sdc2 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 4.280545] [mmc]: sdc2 power_supply is null
[ 4.362640] Registering SWP/SWPB emulation handler
[ 4.499327] cmdline,disp=
[ 4.632742] [HDMI] power vcc-hdmi-18
[ 4.798047] sunxi-rtc sunxi-rtc: setting system clock to 1970-01-01 00:00:10 UTC (10)
[ 4.934725] ths_fetch_sysconfig_para: type err device_used = 1.
[ 5.070746] CPU Budget:Register notifier
[ 5.193626] CPU Budget:register Success
[ 5.200834] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
[ 5.216161] [rf_pm]: select module num is 7
[ 5.224031] [rf_pm]: module power0 name vcc-wifi-33
[ 5.232672] [rf_pm]: failed to fetch module_power1
[ 5.241174] [rf_pm]: mod has no chip_en gpio
[ 5.249039] [rf_pm]: failed to fetch lpo_use_apclk
[ 5.257533] [rf_pm]: regulator on.
[ 5.264739] [wifi_pm]: wifi gpio init is OK !!
[ 5.272972] ALSA device list:
[ 5.279460] #0: audiocodec
[ 5.285771] #1: sndhdmi
[ 5.291776] Warning: unable to open an initial console.
[ 5.304652] Freeing init memory: 6140K
[ 5.400045] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device0, type=4, mode=5
[ 9.611204] systemd-udevd[108]: starting version 215
[ 10.675053] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 11.491110] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 11.525905] systemd[1]: Failed to insert module 'autofs4'
[ 11.780205] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 11.807344] systemd[1]: Detected architecture arm.
[ 11.843769] systemd[1]: Set hostname to .
[ 12.130771] systemd[154]: /usr/lib/systemd/system-generators/anaconda-generator failed with error code 1.
[ 12.214974] systemd[1]: Configuration file /usr/lib/systemd/system/auditd.service is marked world-inaccessible. This has no effect as configuration data is accessible via APIs without restrictions. Proceeding anyway.
[ 12.311432] systemd[1]: Cannot add dependency job for unit tmp.mount, ignoring: Unit tmp.mount is masked.
[ 12.329074] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 12.341566] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 12.358894] systemd[1]: Created slice Root Slice.
[ 12.368299] systemd[1]: Starting Root Slice.
[ 12.381583] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 12.393364] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 12.409204] systemd[1]: Created slice User and Session Slice.
[ 12.419656] systemd[1]: Starting User and Session Slice.
[ 12.434037] systemd[1]: Listening on udev Control Socket.
[ 12.444076] systemd[1]: Starting udev Control Socket.
[ 12.458321] systemd[1]: Listening on Journal Audit Socket.
[ 12.468429] systemd[1]: Starting Journal Audit Socket.
[ 12.482504] systemd[1]: Created slice System Slice.
[ 12.491931] systemd[1]: Starting System Slice.
[ 12.505336] systemd[1]: Created slice system-getty.slice.
[ 12.515375] systemd[1]: Starting system-getty.slice.
[ 12.529435] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 12.540542] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 12.555567] systemd[1]: Reached target Slices.
[ 12.564671] systemd[1]: Starting Slices.
[ 12.577494] systemd[1]: Listening on Journal Socket (/dev/log).
[ 12.588095] systemd[1]: Starting Journal Socket (/dev/log).
[ 12.602486] systemd[1]: Listening on Delayed Shutdown Socket.
[ 12.612720] systemd[1]: Starting Delayed Shutdown Socket.
[ 12.626439] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 12.636945] systemd[1]: Starting LVM2 metadata daemon socket.
[ 12.651053] systemd[1]: Reached target Swap.
[ 12.659534] systemd[1]: Starting Swap.
[ 12.671218] systemd[1]: Listening on udev Kernel Socket.
[ 12.680554] systemd[1]: Starting udev Kernel Socket.
[ 12.693044] systemd[1]: Listening on Journal Socket.
[ 12.701872] systemd[1]: Starting Journal Socket.
[ 12.710444] systemd[1]: Started Device-Mapper Multipath Device Controller.
[ 12.841064] systemd[1]: Starting File System Check on Root Device...
[ 13.050660] systemd[1]: Starting Load legacy module configuration...
[ 13.171465] RTL871X: module init start
[ 13.179777] RTL871X: rtl8189es v4.3.0.4_11916.20140724_COB
[ 13.189964] RTL871X: build time: Oct 4 2015 12:31:50
[ 13.199659] [wifi_pm]: set wl_reg_on 0 !
[ 13.240668] systemd[1]: Starting Setup Virtual Console...
[ 13.255638] systemd[1]: Mounted Huge Pages File System.
[ 13.258096] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.259652] [mmc]: sdc1 power_supply is null
[ 13.288437] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.304958] systemd[1]: Started Load Kernel Modules.
[ 13.322425] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.335359] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.335399] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.337918] [mmc]: sdc1 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.339831] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8, RTO !!
[ 13.339853] *******************Try sdio*******************
[ 13.340664] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.341489] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.342311] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.343133] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.343154] *******************Try sd *******************
[ 13.343966] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.344788] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.345611] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.346433] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.346453] *******************Try mmc*******************
[ 13.346463] [mmc]: sdc1 set ios: clk 400000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.347374] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1, RTO !!
[ 13.347404] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.347530] [mmc]: sdc1 power_supply is null
[ 13.350116] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.351640] [mmc]: sdc1 power_supply is null
[ 13.358080] [wifi_pm]: set wl_reg_on 1 !
[ 13.358276] RTL871X: module init ret=0
[ 13.370061] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.370403] systemd[1]: Mounting FUSE Control File System...
[ 13.496615] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.497726] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.497761] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.500420] [mmc]: sdc1 set ios: clk 300000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.502634] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8, RTO !!
[ 13.502688] *******************Try sdio*******************
[ 13.503772] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.504868] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.505954] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.507041] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.507060] *******************Try sd *******************
[ 13.508138] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.509224] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.510311] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.511401] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.511419] *******************Try mmc*******************
[ 13.511428] [mmc]: sdc1 set ios: clk 300000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.512626] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1, RTO !!
[ 13.512648] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.512758] [mmc]: sdc1 power_supply is null
[ 13.515334] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.516855] [mmc]: sdc1 power_supply is null
[ 13.530021] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.553143] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.554766] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.554787] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.557648] [mmc]: sdc1 set ios: clk 200000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.560387] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8, RTO !!
[ 13.560405] *******************Try sdio*******************
[ 13.562017] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.563637] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.565257] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.566877] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.566894] *******************Try sd *******************
[ 13.568507] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.570128] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.571752] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.573372] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.573389] *******************Try mmc*******************
[ 13.573397] [mmc]: sdc1 set ios: clk 200000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.575138] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1, RTO !!
[ 13.575158] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.575261] [mmc]: sdc1 power_supply is null
[ 13.577829] [mmc]: sdc1 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.579348] [mmc]: sdc1 power_supply is null
[ 13.600022] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.623668] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.625828] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 52, RTO !!
[ 13.625848] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.628970] [mmc]: sdc1 set ios: clk 150000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.632269] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 8, RTO !!
[ 13.632287] *******************Try sdio*******************
[ 13.634428] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.636582] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.638735] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.640890] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 5, RTO !!
[ 13.640911] *******************Try sd *******************
[ 13.643055] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.645208] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.647362] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.649515] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 55, RTO !!
[ 13.649532] *******************Try mmc*******************
[ 13.649540] [mmc]: sdc1 set ios: clk 150000Hz bm OD pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.651842] [mmc]: *** sunxi_mci_dump_errinfo(L826): smc 1 err, cmd 1, RTO !!
[ 13.651864] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
[ 13.651965] [mmc]: sdc1 power_supply is null
[ 14.450469] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 14.510508] systemd[1]: Starting Journal Service...
[ 14.620531] systemd[1]: Starting Apply Kernel Variables...
[ 14.634924] systemd[1]: Mounted POSIX Message Queue File System.
[ 14.645580] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.661408] systemd[1]: Started Set Up Additional Binary Formats.
[ 14.760289] systemd[1]: Mounting Debug File System...
[ 14.778727] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 14.790096] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 14.860503] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[ 14.881291] systemd[1]: Mounted Configuration File System.
[ 14.898632] systemd[1]: Mounted FUSE Control File System.
[ 14.913432] systemd[1]: Mounted Debug File System.
[ 14.927621] systemd[1]: Started Journal Service.
[ 14.937141] type=1130 audit(20.630:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.024783] type=1130 audit(20.720:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck-root comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.114944] type=1130 audit(20.810:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=fedora-loadmodules comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.196781] type=1130 audit(20.890:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-vconsole-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.287328] type=1130 audit(20.980:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=kmod-static-nodes comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.428489] type=1130 audit(21.120:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.570281] type=1130 audit(21.270:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.782952] EXT4-fs (mmcblk0p2): re-mounted. Opts: errors=remount-ro
[ 15.889549] type=1130 audit(21.580:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.969700] type=1130 audit(21.660:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 16.399967] type=1130 audit(22.090:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 17.079229] systemd-journald[184]: Received request to flush runtime journal from PID 1
[ 17.326243] vmouse_input_dev_open
[ 17.390158] vmouse_input_dev_close
Starting udev Wait for Complete Device Initialization...
Starting Load/Save Random Seed...
[ OK ] Reached target Local File Systems (Pre).
Starting udev Kernel Device Manager...
[ OK ] Started Load/Save Random Seed.
[ OK ] Started udev Kernel Device Manager.
[ OK ] Reached target Sound Card.
[ OK ] Found device /dev/ttyS0.
[ OK ] Found device /dev/mmcblk0p1.
Mounting /media/boot...
[ OK ] Mounted /media/boot.
[ OK ] Started udev Wait for Complete Device Initialization.
Starting Activation of DM RAID sets...
[ OK ] Started Activation of DM RAID sets.
[ OK ] Reached target Encrypted Volumes.
[ OK ] Reached target Local File Systems.
Starting Restore /run/initramfs on shutdown...
Starting Tell Plymouth To Write Out Runtime Data...
[ OK ] Started Restore /run/initramfs on shutdown.
[ OK ] Started Flush Journal to Persistent Storage.
[ OK ] Started Tell Plymouth To Write Out Runtime Data.
Starting Create Volatile Files and Directories...
[ OK ] Started Show Plymouth Boot Screen.
[ OK ] Started Create Volatile Files and Directories.
Starting Security Auditing Service...
[ OK ] Reached target Paths.
[ OK ] Started Security Auditing Service.
Starting Update UTMP about System Boot/Shutdown...
[ OK ] Started Update UTMP about System Boot/Shutdown.
[ OK ] Reached target System Initialization.
[ OK ] Listening on D-Bus System Message Bus Socket.
[ OK ] Listening on Open-iSCSI iscsid Socket.
[ OK ] Reached target Timers.
[ OK ] Listening on Open-iSCSI iscsiuio Socket.
[ OK ] Reached target Sockets.
[ OK ] Reached target Basic System.
[ OK ] Started D-Bus System Message Bus.
Starting D-Bus System Message Bus...
Starting NTP client/server...
Starting firewalld - dynamic firewall daemon...
Starting Login Service...
[ OK ] Started Login Service.
[ OK ] Started NTP client/server.
[ OK ] Started firewalld - dynamic firewall daemon.
Starting Network Manager...
[ OK ] Started Network Manager.
[ OK ] Reached target Network.
[ OK ] Started OpenSSH server daemon.
Starting OpenSSH server daemon...
Starting /etc/rc.d/rc.local Compatibility...
[ OK ] Started Logout off all iSCSI sessions on shutdown.
Starting Logout off all iSCSI sessions on shutdown...
[ OK ] Reached target Remote File Systems (Pre).
[ OK ] Reached target Remote File Systems.
Starting Permit User Sessions...
[ OK ] Started Permit User Sessions.
[ OK ] Started /etc/rc.d/rc.local Compatibility.
Starting Terminate Plymouth Boot Screen...
Fedora release 22 (Twenty Two)
Kernel 3.4.39 on an armv7l (ttyS0)
OrangePi login: root
Password:
Last login: Tue Oct 13 15:58:27 on tty1
[root@OrangePi ~]#
Have any comments? Questions?
Drop me a line!
Tom's electronics pages / tom@mmto.org