Table of ContentsPreviousNextIndex

AMCC


Viewing Information About Individual Controllers

If you have more than one controller in your system, you can easily view information about each one using 3DM, in the same session. You can check the controller model, serial number, firmware and driver versions, and the status of the controller.

The following steps tell you how to display information about the controller you want to work with.

To see details about a particular controller in 3DM

  1. Start 3DM and log in.
  2. The 3DM Controller Summary page appears, listing all the 3ware controllers installed in your system.

    The right-most column of the list shows the status of each controller.

    Tip: If you are managing controllers remotely, the list of controllers is for the machine with the IP or URL you entered in the browser address bar.

    For more information about this page, see Controller Summary Page.

  3. To see details about a particular controller, click the ID link for that controller.
  4. The Controller Details page appears.

    For more information about this page, see Controller Details Page.

To see information about a different controller in the 3DM pages

If you have more than one controller in the system, you can switch between them by selecting the one you want to see details about from the Select Controller drop-down list at the right of the menu bar.

This drop-down is available on all pages that provide controller-specific features.

When you select a different controller from this list, the page in view changes, to reflect the details for the controller you selected.

Note: Throughout this documentation, the term current controller is used to refer to the controller currently selected in this drop-down list.

AMCC
www.3ware.com
Direct:(408) 542-8800
Toll Free: (800) 840-6055
email: 3waresupport@amcc.com
Table of ContentsPreviousNextIndex
Copyright (c) 2004-2006, AMCC